Supermicro X9DRi-LN4F+ Motherboard 2x E5-2680V2 SR1A6 2.80GHz 10 Cores 8GB DDR3

Supermicro X9DRi-LN4F+ Motherboard 2x E5-2680V2 SR1A6 2.80GHz 10 Cores 8GB DDR3
Supermicro X9DRi-LN4F+ Motherboard 2x E5-2680V2 SR1A6 2.80GHz 10 Cores 8GB DDR3
Supermicro X9DRi-LN4F+ Motherboard 2x E5-2680V2 SR1A6 2.80GHz 10 Cores 8GB DDR3
Supermicro X9DRi-LN4F+ Motherboard 2x E5-2680V2 SR1A6 2.80GHz 10 Cores 8GB DDR3
Supermicro X9DRi-LN4F+ Motherboard 2x E5-2680V2 SR1A6 2.80GHz 10 Cores 8GB DDR3

Supermicro X9DRi-LN4F+ Motherboard 2x E5-2680V2 SR1A6 2.80GHz 10 Cores 8GB DDR3

E5-2680 v2 CPU 2x4GB DDR3. Supermicro X9DRi-LN4F+ Motherboard with heatsinks & I/O Shield. V1.20 Guaranteed to work with V2 CPU. E5-2680V2 SR1A6 2.80GHz 10Core Processor.

NOTE: Customers in the Continental USA 48 states are qualified for. Dual socket R (LGA 2011) supports Intel® Xeon® processor E5-2600 and E5-2600 v2 family. Intel® C602 chipset; QPI up to 8.0GT/s. Up to 1.5TB ECC DDR3, up to 1866MHz; 24x DIMM slots Depends on memory configuration. Expansion slots: 4 x16 PCI-E 3.0, 1 x8 PCI-E 3.0, 1 x4 PCI-E 3.0 (in x8).

4x Gigabit Ethernet LAN ports; Intel® i350 GbE controller. 8x SATA2 and 2x SATA3 ports. Integrated IPMI 2.0 and KVM with Dedicated LAN.

9x USB 2.0 ports (4 rear, 4 via header + 1 Type A). 13.68" x 13" (34.7cm x 33cm). Dual Socket R (LGA 2011).

Intel® Xeon® processor E5-2600 and E5-2600 v2 family. BIOS version 3.0 or above is required. Motherboard supports this maximum TDP. Please verify your system can thermally support. QPI up to 8 GT/s.

24x 240-pin DDR3 DIMM slots. Up to 1.5TB DDR3 ECC LRDIMM. Up to 768GB DDR3 ECC RDIMM.

Up to 128GB DDR3 ECC/non-ECC UDIMM. 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs. Support ECC and non-ECC UDIMMs Maximum memory speed may be capped by CPU.

Please verify that the chosen CPU can support desired memory speed. 32GB, 16GB, 8GB, 4GB, 2GB, 1GB, 64GB LRDIMM. 1.5 V, 1.35 V. Detects double-bit errors (using ECC memory). SATA 2.0 3Gbps with RAID 0, 1, 5, 10.

SATA 3.0 6Gbps with RAID 0, 1, 5, 10. Support for Intelligent Platform Management Interface v. IPMI 2.0 with virtual media over LAN and KVM-over-LAN support. Intel® i350 Gigabit Ethernet (x4 ports). Virtual Machine Device Queues reduce I/O overhead.

Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output. 1x Realtek RTL8201N PHY (dedicated IPMI). 2x SATA 3.0 ports (6Gbps). 4x SATA 2.0 ports (3Gbps).

4 RJ45 Gigabit Ethernet LAN ports. 1 RJ45 Dedicated IPMI LAN port. 9 USB 2.0 ports total (4 rear + 4 via header + 1 Type A). 2 Fast UART 16550 ports: 1 rear and 1 header. 1 DOM (Disk on Module) power connector. To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details. 4 (x16) PCI-E 3.0 slots. 1 (x8) PCI-E 3.0 slot. 1 (x4) PCI-E 3.0 (in x8) slot Both CPUs need to be installed for full access to PCI-E slots and onboard controllers.

See manual block diagram for details. 128Mb SPI Flash EEPROM with AMI BIOS. ACPI 1.0 / 2.0 / 3.0 / 4.0.

IPMI 1.5 / 2.0. ACPI / APM Power Management. Power-on mode for AC power recovery. Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages. 8x 4-pin fan headers (up to 8 fans). 8x fans with tachometer monitoring. Status monitor for speed control. Pulse Width Modulated (PWM) fan connectors. Monitoring for CPU and chassis environment.

Thermal Control for 8x Fan Connectors. Thermal Monitor 2 (TM2) support.

CPU / System Overheat LED. 10°C - 35°C (50°F - 95°F). 40°C - 70°C (-40°F - 158°F).

The item "Supermicro X9DRi-LN4F+ Motherboard 2x E5-2680V2 SR1A6 2.80GHz 10 Cores 8GB DDR3" is in sale since Tuesday, March 6, 2018. This item is in the category "Computers/Tablets & Networking\Computer Components & Parts\Motherboard & CPU Combos". The seller is "itrecyclenow" and is located in Santa Clara, California. This item can be shipped worldwide.


Supermicro X9DRi-LN4F+ Motherboard 2x E5-2680V2 SR1A6 2.80GHz 10 Cores 8GB DDR3